A Garage Floor Worth Showing Off
installed in one day
Trade the cracked, oil-stained slab for a sealed flake floor you can hose clean in ten minutes. We fix the cracks, the stains and the old paint first, then lay the flake blend you pick over the whole slab.
- Diamond-ground prep, not a paint-over
- Won’t peel or yellow like epoxy
- Covered for life, in writing
Free Garage Floor Quote
Answer five quick questions. It takes about 60 seconds, and we’ll get back to you to book your on-site quote.
1. Where is the garage?
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Free Garage Floor Quote
Answer five quick questions. It takes about 60 seconds, and we’ll get back to you to book your on-site quote.
1. Where is the garage?
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Bare Concrete To finished floor
Diamond-ground prep, the flake blend you choose, and a UV-stable topcoat. That is what a single-day polyurea install does to a worn, stained slab.
Another Floor saved
Every floor here is an Integrity Concrete Coatings install, photographed in real garages across Northern Illinois and Southern Wisconsin.
Showing 12 of 43 photos
Park On It this weekend
This morning it is a cracked, oil-stained slab you have been meaning to deal with for three years. Tomorrow morning it is a sealed flake floor you can walk on. Park on it in another day or two, then spend the next twenty years hosing it off instead of scrubbing it.
What we include
One-Day Installation
Grind, repair, base coat, flake and seal in a single visit. No week of tarps and no living around a wet floor.
The Integrity Seal Lifetime Warranty
Peeling, delamination and manufacturing defects covered for life. It is in your paperwork, not buried in a brochure.
Hundreds of Flake Combinations
Sixteen stock blends plus custom mixes. You pick the look before we put a grinder on the slab.
A Free On-Site Quote
We measure the slab and check its actual condition before pricing it. No cost, no deposit, no obligation.
Why Polyurea Outlasts Epoxy
From Bare Slab to finished floor
Diamond-ground prep, a flake blend you choose, and a UV-stable topcoat, normally all in one day. Play any card to watch that step on a real Integrity install.
Prep & Repair
- Diamond GrindingWe profile the slab mechanically so the coating bonds into the concrete instead of sitting on top of it.
- Crack & Spall RepairCracks, pits and spalling are filled and leveled before any coating goes down.
- Old Coating RemovalFailing epoxy or garage paint comes off first. Coating over it is the single most common reason floors peel.
Color & Flake
- 16 Stock Flake BlendsNightfall, Domino, Pecan, Shoreline and a dozen more, plus custom mixes if none of them fit.
- Full Broadcast CoverageFlake is broadcast into the wet base coat for consistent color with no thin spots.
- Solid Color OptionsA solid color system is available if flake is not the look you want.
Seal & Finish
- UV-Stable TopcoatA polyaspartic topcoat that holds its color instead of yellowing the way epoxy does in sunlight.
- Textured for TractionThe flake profile leaves grip underfoot, which matters when the floor is wet with snowmelt.
- Antimicrobial SurfaceA sealed, non-porous floor that hoses clean and will not harbor bacteria.
Family Owned, family run
Integrity Concrete Coatings has served Northern Illinois and Southern Wisconsin since 2018. We are a family owned and operated business.Integrity Concrete Coatings has served Northern Illinois and Southern Wisconsin since 2018. We are a family owned and operated business, working out of our shop on West Prairie Drive in Sycamore.
Our name says it all. We value integrity and uphold honesty in everything we do, and we stand behind the product long after the truck leaves your driveway.Our name says it all. We value integrity and uphold honesty in all that we do. Entrusting our team with your flooring comes with the assurance of working with a company that stands behind its product and will always put customer satisfaction first. That is what The Integrity Seal is: the promise in writing.
Four Reasons Homeowners call us back
Polyurea, Not Just Epoxy
Our polyurea-polyaspartic systems are 4X stronger than traditional epoxy. They cure faster, flex with the slab instead of cracking, resist chemicals better, and stay UV stable so they do not yellow.
Professionally Trained Installers
Factory-trained crews who understand the chemistry behind polyurea application. Prep is where coatings fail, and prep is the part we are strictest about.
The Integrity Seal
A lifetime warranty covering peeling, delamination and manufacturing defects. We can offer it because of what we put down and how we put it down.
Installed Year-Round
Polyurea cures in temperatures as low as 20°F. An Illinois winter does not put your garage on a waiting list until spring the way epoxy does.
Not Just Our Word for it
Integrity Concrete Coatings is the preferred coatings company of Home Sweet Home Chicago, endorsed by Ace Hardware's Lou Manfredini, and featured by WIFR Channel 23 in Rockford. Our Google reviews are below, live and unedited.
Three Steps To A Finished Floor
Our proven 3-step installation process ensures a flawless, long-lasting finish, and most garages are finished in a single visit.
Clean & Prep
We thoroughly clean and prepare the slab with diamond grinding equipment, removing existing coatings, oils and contaminants, then repair cracks and spalling so the coating has something solid to bond to.
Flake & Base Layer
We apply a premium polyurea base coat and broadcast your chosen decorative flake into it. Hundreds of color combinations, picked before we start.
Seal & Finish
A clear polyaspartic topcoat goes on for UV protection, chemical resistance and a textured finish. Walk on it in about 24 hours; park on it in 48 to 72.
Ready when you are.Your free on-site quote is one call away.
Floors We finish
Sixteen stock flake blends plus solid color systems. These are real Integrity floors, so you can see how a family of colors actually reads under garage lighting.
Dark Blends
Charcoal and black bases that hide dust and tire marks.
Warm Neutrals
Tans and browns that stay warm under garage lighting.
Black & White
High-contrast blends with a clean, graphic finish.
Cool Blues
Deeper, saturated bases with a cooler cast.
Light Grays
Bright, low-contrast blends that make a space feel larger.
Our 16 Stock Flake Blends: Custom Mixes On Request
- Beamer
- Cabin Fever
- Creek Bed
- Domino
- Gravel
- Loon
- Madras
- Nightfall
- Obsidian
- Outback
- Pecan
- Raven
- Shoreline
- Silver Creek
- Stonewash
- Wombat
Serving Northern Illinois & Southern Wisconsin
We install garage floor coatings across Northern Illinois and Southern Wisconsin from our shop in Sycamore. If your town is not on the list, call. There is a good chance we still cover it.
Cities
- Rockford
- Aurora
- Naperville
- Elgin
- Joliet
- DeKalb
- Sycamore
- St. Charles
- Geneva
- Schaumburg
- Barrington
- Wheaton
- Plainfield
- New Lenox
- North Aurora
- Huntley
- Hampshire
Counties
- Boone County
- Cook County
- DeKalb County
- DuPage County
- Kane County
- Kendall County
- Lake County
- Lee County
- McHenry County
- Ogle County
- Will County
- Winnebago County
What Happens at Your free quote
The quote is free. No deposit, no obligation, nothing to decide on the spot. We come out, measure the slab, and check its actual condition: moisture, cracks, spalling, and whatever coating is on it now.
Then you get a real number and a flake blend picked out. If the slab needs repair work before a coating will hold, we will tell you that up front rather than coating over a problem and letting it surface in two years.
Frequently Asked
How long does the installation take?
Most residential garages are completed in just one day. Our 3-step process (clean and prep, flake and base layer, seal and finish) means you get a finished floor in a single visit. It is typically ready to walk on within 24 hours and ready for vehicles in 48 to 72 hours.
How long will a garage floor coating last?
Our polyurea concrete coatings last 15 to 20+ years with proper maintenance. Unlike traditional epoxy, which can yellow and peel over time, our polyurea-polyaspartic systems are UV stable and 4X stronger than standard epoxy, and they are backed by The Integrity Seal, our lifetime warranty.
How much does a garage floor coating cost?
It varies with the size of the garage, the condition of the slab, and the coating system you choose. Most residential garage floors run $6 to $10 per square foot. We give free quotes and can put an accurate number on your specific floor once we have seen it.
What is the difference between epoxy and polyurea coatings?
Polyurea is a more advanced system that is 4X stronger than traditional epoxy. It is UV stable so it will not yellow, it cures faster, it is more flexible so it resists cracking, and it has superior chemical resistance. Epoxy is a good product, but polyurea-polyaspartic is why we can offer a lifetime warranty.
Can you install in cold weather?
Yes. One of the major advantages of polyurea is that it can be applied year-round, in temperatures as low as 20°F. Unlike epoxy, which needs warmer conditions, our systems cure properly in the cold, so we install throughout the Illinois winter.
Do you offer a warranty?
Absolutely. We stand behind our work with The Integrity Seal, our comprehensive lifetime warranty on all polyurea-polyaspartic coating systems. It covers peeling, delamination and manufacturing defects. We can offer one of the best warranties in the industry because we use premium materials and expert installation techniques.
Can you coat over my existing epoxy or garage paint?
It depends on the condition of what is already down. In most cases we recommend removing the old coating to ensure proper adhesion and longevity. We will assess your current floor during the free quote and recommend the best approach. Proper surface preparation is what makes a coating last decades instead of years.
Can I choose the color?
Yes. You can choose from hundreds of color flake combinations, including our 16 stock blends, plus solid color systems. You pick the look at the quote, before any work starts.
What areas do you serve?
We proudly serve Northern Illinois and Southern Wisconsin, including Rockford, Aurora, Elgin, Joliet, Naperville, DeKalb, Sycamore, St. Charles, Geneva and the surrounding areas. If you are not sure whether we cover your location, give us a call. We are happy to check.
Ready to Save
your floor?
Tell us about your garage and we will come measure it, check the slab, and give you a real number: free, with no deposit and no obligation. Most installs happen in a single day, and every one of them carries The Integrity Seal.
- We install year-round, down to 20°F, so winter is not a reason to wait.
- Pick your flake blend at the quote: sixteen stock blends plus custom mixes.
- Most floors land between $6 and $10 a square foot; we price yours on the slab.
Free Garage Floor Quote
Answer five quick questions. It takes about 60 seconds, and we’ll get back to you to book your on-site quote.
1. Where is the garage?
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.